position angle
英 [pəˈzɪʃn ˈæŋɡl]
美 [pəˈzɪʃn ˈæŋɡl]
网络 位置角; 方位角; 位置角度
双语例句
- For type ⅰ and type ⅱ crank-rocker mechanisms with quick return characteristics, there exist some inherent relations between the link dimensions and the kinematics capability parameters, such as minimum transmission angle, extreme position angle and angular stroke of rocker.
基于平面四杆机构的空间模型，针对具有急回特性的I、Ⅱ型曲柄摇杆机构，深入分析了机构最小传动角、极位夹角和摇杆摆角等运动性能参数与构件尺寸之间的内在关系； - Furthermore, considering the multi control parameter, the article also found the rotor position angle controller based fuzzy logic so as to optimize the whole control system and effectively reduce the torque ripple.
考虑到SRD具有可控参数多的特点，本文同时建立了优化转子位置角的模糊控制器来达到智能化转矩控制的目的，从而有效抑制SR电机的转矩脉动。 - Because of different position and angle of view, the same object may have serious deformation in images, so how to recognize the one is not well resolved.
由于获得图像的角度和位置的不同，同一目标在不同图像中会有较大的变形，如何正确地识别出该目标是至今未能很好解决的问题。 - Next, a novel inductance method and rotor position angle estimation using fuzzy logic are studied. In this dissertation, some knowledge about error signals are detailed, at the same time, some research for improving precision is also provided.
二是基于模糊推理规则的转子位置估算方法，针对此方法中误差信号进行分析，研究提高角度估算精度的策略和方法。 - An example applied vector calculation method to decide the weight and position angle of correction weight, it is very near to dynamic balance measured result based on influence coefficient method.
给出应用矢量计算法确定校重大小和位置角的例子，其结果与基于影响系数法编程的动平衡测试十分接近。 - Based on the working feature of flying shear mechanisms and considering the motion track, velocity and position angle of connecting rod, a multi-objective optimization model is built.
根据飞剪剪切机构的工作特点，综合考虑连杆运动轨迹、速度和位置角，建立多目标优化模型。 - Once the call returns for the current time step, you clear the forces applied to the objects from the last step, and then get the current position and angle of your dynamic body.
一旦此调用针对当前时间步长返回，就可以清空上一步长施加到这些物体上的力，然后获得动态物体的当前方位和角度。 - Amplitude and instantaneous position angle of the stator flux linkage can be controlled by a equivalent symmetrical voltage vector of arbitrary direction and controllable magnitude, thereby, expectational torque will be achieved.
该调制方法获得方向任意且大小可控的等效电压矢量，以此控制定子磁链的幅值和旋转速度，从而达到对输出电磁转矩的有效控制，并获得恒定的器件开关频率。 - According to the analysis of the effect and generation mechanism of position angle error, a position correct technology based on model reference adaptive control method is proposed to promote the control precision of currents.
在分析位置角度误差的影响和产生机理的基础上，提出了基于模型参考自适应控制方法的位置角度校正技术，来提高电流的控制精度。 - Through the solution, the star position angle can be found with so-called "star distance"( Short for the spherical distance between two stars) determined So as to have the fix solved.
用解球面三角形的方法，通过两天体的球面距离，求得星位角，从而求得船位的经纬度。